Classification list
Shenzhen magnetic lock manufacturers
  • Shenzhen magnetic lock manufacturers
  • inquiry
    content

    Product No:BHL-5001SLD


    Product specifications are as follows:


    Body size: 265mm long X73mm wide X40mm high


    Iron block size: 185mm long X61mm wide X16.5mm high


    Withstand tension: 500kg (1200Lbs) linear tension


    Input voltage: DC12 or 24V


    Current consumption: 12V/480mA, 24V/240mA


    Opening method: 90°


    Optional accessories: wooden door fire door iron block with LZ bracket BHB-150L


              Lower frameless glass door with U-shaped bracket BHB-122U


    Adaptation range: heavy single door with frameless glass door, wooden door, fire door, etc.


    Professional device: built-in surge absorber and reverse current protection device


    Safety type: power off unlock


    Delay function: 0 to 10 seconds (BHL-5001SLDs with delay)


    Signal output: with two-color indicator light (red light after unlocking, green light after locking), dry contact output with lock status detection (COM, NC, NO), maximum withstand power 3A, NO output when locked; with door status detection Dry contact output (NO after locking)


    Surface temperature: ambient temperature +20 ° C or less


    Operating temperature: -40 to +60 ° C


    Use humidity: 0-90% (relative air humidity)


    Shell treatment: sandblasting anodizing plating treatment


    Lock body treatment: fine grinding and environmental protection zinc


    Iron block treatment: fine grinding and environmental protection zinc


    Product weight: 5 kg / handle


    Shenzhen magnetic lock manufacturers

    Matters needing attention: Shenzhen magnetic lock manufacturers in order to ensure the normal use of the lock 1, the installation should pay attention to the lock body and the iron block should be completely smooth suction; 2, the iron block needs a little active clearance; 3, the lock body, the iron block suction surface Do not scratch, bruise or fall; 4, pay attention to the ambient temperature and humidity used, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other Please refer to the installation instruction manual carefully for any inconveniences;


    Product advantages: This product pulls the foot, wears, uses electromagnetic suction work, no mechanical failure, professional no residual magnetism, insulation design treatment, built-in reverse current protection device


    Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense; qualified by ANSI, CE, ROHS, UL;


    Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!

    上一篇:Accesscontrolelectromagneticlo...
    下一篇:Hangingsingledoormagneticlock...

    分享到