Classification list
Waterproof single door magnetic lock
  • Waterproof single door magnetic lock
  • inquiry
    content

    Product No :BHL-S5001


    Product specifications are as follows:


    Waterproof wall mounted single door magnetic lock body size: 230mm long X63mm wide X39mm high


    Iron block size: 185mm long X61mm wide X16mm high


    Withstand tension: 500kg (1200Lbs) linear tension


    Input voltage: DC12 or 24V


    Current consumption: 12V/480mA, 24V/240mA


    Opening method: 90°


    Installation method: optional side or hanging type


    Optional accessories: inner door can be equipped with LZ bracket BHB-151L


    Lower frameless glass door with U-shaped bracket BHB-122U


    Adaptation range: wooden doors, fire doors and outdoor iron doors


    Professional device: built-in surge absorber


    Safety type: power off unlock


    Degree of protection: IP67 (dust can not enter the entire diameter of the object can not exceed the gap of the outer casing to prevent short-term immersion under normal temperature and pressure, when the shell is temporarily immersed in 1M deep water will not cause harmful effects)


    Signal output: BHL-S5001 without status signal output


                      BHL-S5001D with door status detection dry contact output (NO after locking)


    Surface temperature: ambient temperature +20 ° C or less


    Operating temperature: -40 to +60 ° C


    Humidity: 0-96% (relative air humidity)


    Shell treatment: brushed stainless steel


    Lock body treatment: fine grinding and environmental protection zinc


    Iron block treatment: fine grinding and environmental protection zinc


    Product weight: 5 kg / handle


    Waterproof single door magnetic lock

    Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the iron block to be completely and smoothly connected during installation; 2. It is necessary to keep a little active clearance when installing the iron block; 3. The suction surface of the lock body and the iron block shall not be allowed. Scratches, bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other Please refer to the installation and operation manual carefully for all matters involved;


    Product advantages: This product pulls the foot, wears, uses electromagnetic suction work, no mechanical failure, professional no residual magnetism, insulation design treatment, built-in reverse current protection device


    Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense; qualified by ANSI, CE, ROHS, UL;


    Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!


    上一篇:Waterproof door lock
    下一篇:Waterproofdoubledoormagneticlo...

    分享到