Product No :BHL-S7500
Product specifications are as follows:
Waterproof door lock lock body size: 280mm long X64mm wide X40mm high
Iron block size: 235mm long X61mm wide X16mm high
Withstand tension: 750kg (1500Lbs) linear tension
Input voltage: DC12 or 24V
Current consumption: 12V/480mA, 24V/240mA
Opening method: 90°
Installation method: optional front or side mounting
Adaptation range: wooden doors, fire doors and outdoor iron doors, etc.
Professional device: built-in surge absorber
Safety type: power off unlock
Degree of protection: IP67 (dust can not enter the entire diameter of the object can not exceed the gap of the outer casing to prevent short-term immersion under normal temperature and pressure, when the shell is temporarily immersed in 1M deep water will not cause harmful effects)
Signal output: BHL-S7500 without status signal output
BHL-S7500D with door status detection dry contact output (NO after locking)
Surface temperature: ambient temperature +20 ° C or less
Operating temperature: -40 to +60 ° C
Humidity: 0-96% (relative air humidity)
Shell treatment: sandblasting anodizing plating treatment
Lock body treatment: fine grinding and environmental protection zinc
Iron block treatment: fine grinding and environmental protection zinc
Product weight: 6 kg / handle
Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the iron block to be completely and smoothly connected during installation; 2. It is necessary to keep a little active clearance when installing the iron block; 3. The suction surface of the lock body and the iron block Do not scratch, bruise or fall; 4, pay attention to the ambient temperature and humidity used, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other Please refer to the installation instruction manual carefully for any inconveniences;
Product advantages: This product pulls the foot, wears, uses electromagnetic suction work, no mechanical failure, professional no residual magnetism, insulation design treatment, built-in reverse current protection device
Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense; qualified by ANSI, CE, ROHS, UL;
Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!