Classification list
Low temperature magnetic electric lock
  • Low temperature magnetic electric lock
  • inquiry
    content

    Product No :FSP-100C


    Product Name: Low temperature multi-function electric lock


    Body size: 200mm long X34mm wide X42mm high


    Panel size: 200mm long X34mm wide X3mm thick


    Cover: 210mm long X42mm wide X0.8mm thick


    Magnet holder: 90mm long X24mm wide X2mm thick


    Cylinder diameter: 15.5mm


    Lock tongue length: 15.5 mm (pop-up)


    Input voltage: DC12V


    Starting current: 0.9A (starting moment)


    Working current: 0.1A (fully locked)


    Delay function: 0 seconds, 2.5 seconds, 5 seconds


    Door opening method: 180°


    Safety type: power off unlock


    Low temperature magnetic electric lock

    Optional accessories: upper and lower frameless glass door with door clamp FSP-22D


                      Frameless glass door with small door clamp FSP-20D or FSP-21D


    Adaptation range: glass door, wooden door, fire door, metal door


    Professional device: built-in surge absorber device


    Signal output: FSP-100-1 without delay circuit


               FSP-100 three-wire with delay (purple to earth unlock function)


               FSP-100C+ six-wire with delay, with magnetic door function


               FSP-100C nine line with delay, with door magnetic, lock status detection


    Cylinder strength: stainless steel Japanese brushed wire drawing, withstand 850kg lateral pressure


    Lock body surface temperature: ambient temperature +10°


    Door gap magnetic sense distance: 10mm


    Operating ambient temperature: -40 to +55 ° C


    Ambient humidity: 0 to 80% relative humidity


    Electric lock durable design: professional electromagnetic material design, 800,000 durability


    Panel material design: high-strength aluminum alloy, brush anodizing


    Product weight: 1 kg / handle



    Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the magnet seat to correct the hole position; 2, the gap between the lock body and the magnet seat should not be greater than 10mm; 3, the lock body, magnet seat must not be scratched, Bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other incomplete matters please Carefully refer to the installation and operating instructions;

    上一篇:Ultra-shortmagneticelectricloc...
    下一篇:Normallyclosedmagneticelectric...

    分享到