Product No :BHL-600C
Product specifications are as follows:
Lock body size: 140mm long X32mm wide X42mm high
Cover: 150mm long X40mm wide X0.8mm thick
Magnet holder: 90mm long X24mm wide X2mm thick
Mounting hole distance: 120mm
The distance between the lock cylinder and the nearest hole center: 35mm
Cylinder diameter: 15.0mm
Lock tongue length: 10.0 mm (pop-up)
Input voltage: DC12V can be used
Starting current: 0.18A (starting moment)
Working current: 0.18A (fully locked)
Door opening method: 180°
Safety type: power off unlock
Optional accessories: lower frameless glass door with small door clamp BHB-100D or BHB-700D
Adaptation range: glass door, wooden door, fire door, metal door
Professional device: built-in surge absorber and reverse current protection device
Signal output: with lock delay, with door status signal NO, NC two sets of output, with the function of unlocking the ground
Lock delay: 0, 2.5, 5 seconds
Cylinder strength: stainless steel Japanese grain treatment, withstand 600kg lateral pressure
Lock body surface temperature: ambient temperature +10°
Door gap magnetic sense distance: 10mm
Operating ambient temperature: -20 ~ +55 ° C
Ambient humidity: 0 to 80% relative humidity
Electric lock durable design: professional electromagnetic material design, 800,000 durability
Lock body design: high-strength aluminum alloy, sandblasted anodizing
Product weight: 0.5kg / handle
Matters needing attention: In order to ensure the normal use of the lock 1, pay attention to the lock body and the magnet seat to correct the hole position; 2, the gap between the lock body and the magnet seat should not be greater than 6mm; 3, the lock body, the magnet seat must not be scratched, Bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other incomplete matters please Carefully refer to the installation and operating instructions;
Product advantages: This product is a moving part of the product, the principle of the use of magnetic field reverse push bolt, no mechanical push; ultra-low temperature design, more energy-saving and more environmentally friendly; 800,000 power-on locking durability; built-in surge absorber to prevent power Unstable burn lock body; high-strength aluminum alloy lock body, stainless steel lock tongue; product specifications, complete set, suitable for all types of door lock installation
Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months. Notice; pictures and related content of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!