Product model: BHL-500SLD
Product Name: 1502SLD full frameless glass door electric lock
Main body specifications: 148mm long X43mm wide X39mm high
Magnet holder: 148mm long X43mm wide X25mm thick
Input voltage: DC12V use
Cylinder diameter: 12.5mm
Lock tongue length: 14.0 mm (pop-up)
Starting current: 1.3A (starting moment)
Working current: 0.1A (unlocked maintenance)
Door opening method: 180°
Safety type: power off unlock
Adaptation range: full frameless glass door up and down, glass door thickness 12mm, glass door gap 8~12mm
Professional device: built-in surge absorber and reverse current protection device
Signal output: with lock delay, with door status signal NO, NC two sets of output, with lock status signal NO, NC two sets of output
Lock delay: 0~3~6 seconds
Outbound direction: delayed dialing is left out in the U clip
The delay dial code is the right exit line on the outside
Cylinder strength: stainless steel Japanese grain treatment, withstand 850kg lateral pressure
Lock body surface temperature: ambient temperature +10°
Magnet magnetic distance: 10mm
Operating ambient temperature: -20 ~ +55 ° C
Ambient humidity: 0 to 80% relative humidity
Electric lock durable design: professional electromagnetic material design, 800,000 durability
Panel material design: high-strength aluminum alloy, brush anodizing
Product weight: 1 kg / handle
Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the magnet seat to correct the hole position; 2, the gap between the lock body and the magnet seat should not be greater than 10mm; 3, the lock body, magnet seat must not be scratched, Bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other incomplete matters please Carefully refer to the installation and operating instructions;
Product advantages: This product is especially suitable for upper and lower frameless glass doors; the moving parts of the moving parts are polished, and the magnetic induction is used to prevent mechanical failure; the ultra-low temperature design is more energy-saving and more environmentally friendly; 800,000 times of power-on locking durability; built-in The surge absorber prevents the unstable power supply from burning the lock body; the high-strength aluminum alloy lock body and the stainless steel lock tongue; the product specifications are complete and the installation is convenient and simple;
Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. The product damage, maintenance materials and other expenses are at the user's own expense; the products pass the EU CE and China ROHS certification;
Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!