BHS-120

120KG fire door magnetic lock

Product specifications are as follows:

Lock body size: 86mm long * 65mm wide * 105mm high

Suction cup size: 65mm long *86mm wide * 45mm high

Suction cup diameter: 67mm diameter

Working voltage: DC12V or 24V

Working current: DC12V=120mA or DC24V=60mA

Withstand tension: 120KG (static linear tension)

Safety type: power off unlock, self-contained close power switch

Installation method: floor installation or side wall

Applicable door type: all smoke doors, fire doors

Professional practice: built-in reverse current protection diode and surge absorber

Lock body treatment: pure iron electroplated nickel

Base treatment: zinc alloy precision casting sandblasting oxidation

Surface temperature: ambient temperature +20 ° C or less

Operating temperature: -40 to +60 ° C

Humidity: 0-96% (relative air humidity)

Product weight: 1.3kg

Note: In order to ensure the normal use of the lock, the lock body and the iron block should be completely and smoothly connected during installation; 2. There must be a little active clearance when installing the iron block; 3. The suction surface of the lock body and the iron block must not be used. Scratches, bruises, falls; 4, pay attention to the environment, ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring, to ensure that the electric lock works normally; 6, usually Maintenance must be carried out to ensure that the electric lock works normally for a long time; 7. Please refer to the installation and operation manual for other incomplete matters;

Product advantages: This product pulls the foot, wears, uses electromagnetic suction work, no mechanical failure, professional no residual magnetism, insulation design treatment, built-in reverse current protection device; mainly designed for all kinds of smoke doors, from With a short-distance power switch;

Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense; CE certified;

Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!