Electronic lock manufacturers

Product classification

Contact

Shenzhen Behost Electronics Co. Ltd

Contact: Miss Jiang, Miss Luo

Mobile: 13570895007

TEL: 0755-27376780 23729748

FAX:0755-23358748

Email: Ld@behost.com.cn

Address: Building B, No. 4-2, Wanfeng Center Road, Xinqiao Street, Baoan District, Shenzhen


Two-wire single-door magnetic lock

Your current position: Home page >> Products >> Magnetic lock

Two-wire single-door magnetic lock

  • Taxonomy:Magnetic lock

  • Click times:
  • Date of release:2018/08/09
  • Online inquiry
Detailed introduction

Product No:BHL-1501D


The specifications of the two-wire single-door magnetic lock are as follows:


Body size: 165mm long X38.5mm wide X21.5mm high


Iron block size: 135mm long X32mm wide X8mm high


Withstand tension: 150kg (300Lbs) linear tension


Input voltage: DC12 or 24V ± 10%


Current consumption: 12V/360mA, 24V/180mA


Opening method: 90°


Optional accessories: BHB-110L, BHB-110U


Adaptation range: lighter doors such as wooden doors, fire doors, metal doors, etc.


Professional device: built-in surge absorber


Safety type: power off unlock


Signal output: dry contact output with door status signal, maximum withstand power 3A, NO output when locked, unlocked without indicator light


Surface temperature: ambient temperature +20 ° C or less


Operating temperature: -40 to +60 ° C


Use humidity: 0-90% (relative air humidity)


Shell treatment: sandblasting anodizing plating treatment


Lock body treatment: fine grinding and environmental protection zinc


Iron block treatment: fine grinding and environmental protection zinc


Two-wire single-door magnetic lock

Product weight: 1 kg / Note: In order to ensure the normal use of the lock 1, the installation should pay attention to the lock body and the iron block should be completely and smoothly connected; 2, the iron block needs a little active clearance; 3, the lock body, the iron block The suction surface must not be scratched, bruised or broken; 4. Pay attention to the ambient temperature and humidity used, and choose the appropriate lock; 5. It must use sufficient power supply and accurate wiring; 6. It must be maintained and maintained normally; 7. Please refer to the installation and operation manual carefully for other incomplete matters.


Product advantages: This product pulls the foot, wears, uses electromagnetic suction work, no mechanical failure, professional no residual magnetism, insulation design treatment, built-in reverse current protection device


Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense;


Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!

The address of this article:http://en.behost.com.cn/product/628.html

Key word:Two-wiresingle-doormagneticlock,Singledoormagneticlock,Singledoormagneticlockmanufacturer

Recently browse:

Electronic lock manufacturers

  • Service
  • number
    13570895007
  • Message
  • web site
  • Online Service