Electronic lock manufacturers

Product classification

Contact

Shenzhen Behost Electronics Co. Ltd

Contact: Miss Jiang, Miss Luo

Mobile: 13570895007

TEL: 0755-27376780 23729748

FAX:0755-23358748

Email: Ld@behost.com.cn

Address: Building B, No. 4-2, Wanfeng Center Road, Xinqiao Street, Baoan District, Shenzhen


Shenzhen magnetic lock manufacturers

Your current position: Home page >> Products >> Magnetic lock

Shenzhen magnetic lock manufacturers

  • Taxonomy:Magnetic lock

  • Click times:
  • Date of release:2018/08/09
  • Online inquiry
Detailed introduction

Product No:BHL-5001SLD


Product specifications are as follows:


Body size: 265mm long X73mm wide X40mm high


Iron block size: 185mm long X61mm wide X16.5mm high


Withstand tension: 500kg (1200Lbs) linear tension


Input voltage: DC12 or 24V


Current consumption: 12V/480mA, 24V/240mA


Opening method: 90°


Optional accessories: wooden door fire door iron block with LZ bracket BHB-150L


          Lower frameless glass door with U-shaped bracket BHB-122U


Adaptation range: heavy single door with frameless glass door, wooden door, fire door, etc.


Professional device: built-in surge absorber and reverse current protection device


Safety type: power off unlock


Delay function: 0 to 10 seconds (BHL-5001SLDs with delay)


Signal output: with two-color indicator light (red light after unlocking, green light after locking), dry contact output with lock status detection (COM, NC, NO), maximum withstand power 3A, NO output when locked; with door status detection Dry contact output (NO after locking)


Surface temperature: ambient temperature +20 ° C or less


Operating temperature: -40 to +60 ° C


Use humidity: 0-90% (relative air humidity)


Shell treatment: sandblasting anodizing plating treatment


Lock body treatment: fine grinding and environmental protection zinc


Iron block treatment: fine grinding and environmental protection zinc


Product weight: 5 kg / handle


Shenzhen magnetic lock manufacturers

Matters needing attention: Shenzhen magnetic lock manufacturers in order to ensure the normal use of the lock 1, the installation should pay attention to the lock body and the iron block should be completely smooth suction; 2, the iron block needs a little active clearance; 3, the lock body, the iron block suction surface Do not scratch, bruise or fall; 4, pay attention to the ambient temperature and humidity used, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other Please refer to the installation instruction manual carefully for any inconveniences;


Product advantages: This product pulls the foot, wears, uses electromagnetic suction work, no mechanical failure, professional no residual magnetism, insulation design treatment, built-in reverse current protection device


Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense; qualified by ANSI, CE, ROHS, UL;


Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!

The address of this article:http://en.behost.com.cn/product/645.html

Key word:Shenzhenmagneticlockmanufacturers,Singledoormagneticlock,Doubledoormagneticlock

Recently browse:

Electronic lock manufacturers

  • Service
  • number
    13570895007
  • Message
  • web site
  • Online Service