Electronic lock manufacturers

Product classification


Shenzhen Behost Electronics Co. Ltd

Contact: Miss Jiang, Miss Luo

Mobile: 13570895007

TEL: 0755-27376780 23729748


Email: Ld@behost.com.cn

Address: Building B, No. 4-2, Wanfeng Center Road, Xinqiao Street, Baoan District, Shenzhen

Waterproof single door magnetic lock

Your current position: Home page >> Products >> Waterproof magnetic lock

Waterproof single door magnetic lock

  • Taxonomy:Waterproof magnetic lock

  • Click times:
  • Date of release:2018/08/09
  • Online inquiry
Detailed introduction

Product No :BHL-S2500

Product specifications are as follows:

Waterproof single door magnetic lock body size: 225mm long X40.5mm wide X26mm high

Iron block size: 180mm long X38mm wide X12.7mm high

Withstand tension: 270kg (600Lbs) linear tension

Input voltage: DC12 or 24V

Current consumption: 12V/480mA, 24V/240mA

Opening method: 90°

Installation method: optional side or hanging type

Optional accessories: wooden door fire door iron block with LZ bracket BHB-126L

                Lower frameless glass door with U-shaped bracket BHB-122U

Adaptation range: under the frameless glass door, wooden door, fire door and outdoor iron door, etc.

Professional device: built-in surge absorber

Safety type: power off unlock

Degree of protection: IP67 (dust can not enter the entire diameter of the object can not exceed the gap of the outer casing to prevent short-term immersion under normal temperature and pressure, when the shell is temporarily immersed in 1M deep water will not cause harmful effects)

Signal output: BHL-S2500 without status signal output

                  BHL-S2500D with door status detection dry contact output (NO after locking)

Surface temperature: ambient temperature +20 ° C or less

Operating temperature: -40 to +60 ° C

Humidity: 0-96% (relative air humidity)

Shell treatment: sandblasting anodizing plating treatment

Lock body treatment: fine grinding and environmental protection zinc

Iron block treatment: fine grinding and environmental protection zinc

Product weight: 2 kg / handle

Waterproof single door magnetic lock

Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the iron block to be completely and smoothly connected during installation; 2. It is necessary to keep a little active clearance when installing the iron block; 3. The suction surface of the lock body and the iron block Do not scratch, bruise or fall; 4, pay attention to the ambient temperature and humidity used, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other Please refer to the installation instruction manual carefully for any inconveniences;

Product advantages: This product pulls the foot, wears, uses electromagnetic suction work, no mechanical failure, professional no residual magnetism, insulation design treatment, built-in reverse current protection device

Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense; qualified by ANSI, CE, ROHS, UL;

Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!

The address of this article:http://en.behost.com.cn/product/650.html

Key word:Waterproofsingledoormagneticlock,Singledoormagneticlock,Magneticlockmanufacturer

The last one:None
The next one:Waterproof double door magnetic lock

Recently browse:

Electronic lock manufacturers

  • Service
  • number
  • Message
  • web site
  • Online Service