Electronic lock manufacturers

Product classification


Shenzhen Behost Electronics Co. Ltd

Contact: Miss Jiang, Miss Luo

Mobile: 13570895007

TEL: 0755-27376780 23729748


Email: Ld@behost.com.cn

Address: Building B, No. 4-2, Wanfeng Center Road, Xinqiao Street, Baoan District, Shenzhen

Non-contact induction access control

Your current position: Home page >> Products >> Access control

Non-contact induction access control

  • Taxonomy:Access control

  • Click times:
  • Date of release:2018/08/10
  • Online inquiry
Detailed introduction


Non-contact induction access control function description:

Dimensions: 120mm long * 76mm wide * 28mm thick

Built-in ID (EM) card reader

Working voltage: DC12V or 24V

Standby power consumption: 0.08mA

Working current: 0.11mA

Output frequency: 125KHZ

Card reading distance: ≤5cm

Data storage: A zone capacity of 1000 ID cards and 1000 passwords

           Zone B capacity 10 ID cards or 10 passwords

Open the door: 2-6 digits of password, or card reading, or password plus card

Mode of operation: numeric keypad

Unlock delay: 0-99 seconds

Dust rating: IP=65

Working environment: -20 ° C ∽ 50 ° C

Ambient humidity: ≤90%

Housing material: aluminum alloy

Non-contact induction access control

product weight:

Other functions of the product: 1, tamper alarm function; 2, watchdog and power-on reset function; 3, external unlock button function; 4, dual relay output; 5, detectable door status;

Installation note:

Use a professional tool to open the back cover of the access control;

Use the opening template attached to the product to be placed in the desired position and drill according to the illustration;

Use the screws provided with the product to fix the back cover and pull the lead out from the center outlet hole to ensure that the back cover is in a horizontal position;

Refer to the wiring diagram of the product manual to connect the access control, power supply, electric lock, button, etc.;

After ensuring the wiring is correct, put the door lock back to the back cover position and screw it tightly;

Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense;

Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!

The address of this article:http://en.behost.com.cn/product/591.html

Key word:Non-contactinductionaccesscontrol,InductionIDcardaccesscontrol,Accesscontrolmachine

Recently browse:

Electronic lock manufacturers

  • Service
  • number
  • Message
  • web site
  • Online Service