Electronic lock manufacturers

Product classification


Shenzhen Behost Electronics Co. Ltd

Contact: Miss Jiang, Miss Luo

Mobile: 13570895007

TEL: 0755-27376780 23729748


Email: Ld@behost.com.cn

Address: Building B, No. 4-2, Wanfeng Center Road, Xinqiao Street, Baoan District, Shenzhen

Ultra-short magnetic electric lock

Your current position: Home page >> Products >> Narrow body electric lock

Ultra-short magnetic electric lock

  • Taxonomy:Narrow body electric lock

  • Click times:
  • Date of release:2018/08/09
  • Online inquiry
Detailed introduction

Product No :BHL-600C

Product specifications are as follows:

Lock body size: 140mm long X32mm wide X42mm high

Cover: 150mm long X40mm wide X0.8mm thick

Magnet holder: 90mm long X24mm wide X2mm thick

Mounting hole distance: 120mm

The distance between the lock cylinder and the nearest hole center: 35mm

Cylinder diameter: 15.0mm

Lock tongue length: 10.0 mm (pop-up)

Input voltage: DC12V can be used

Starting current: 0.18A (starting moment)

Working current: 0.18A (fully locked)

Door opening method: 180°

Safety type: power off unlock

Optional accessories: lower frameless glass door with small door clamp BHB-100D or BHB-700D

Adaptation range: glass door, wooden door, fire door, metal door

Professional device: built-in surge absorber and reverse current protection device

Signal output: with lock delay, with door status signal NO, NC two sets of output, with the function of unlocking the ground

Lock delay: 0, 2.5, 5 seconds

Cylinder strength: stainless steel Japanese grain treatment, withstand 600kg lateral pressure

Lock body surface temperature: ambient temperature +10°

Door gap magnetic sense distance: 10mm

Operating ambient temperature: -20 ~ +55 ° C

Ambient humidity: 0 to 80% relative humidity

Electric lock durable design: professional electromagnetic material design, 800,000 durability

Lock body design: high-strength aluminum alloy, sandblasted anodizing

Product weight: 0.5kg / handle

Ultra-short magnetic electric lock

Matters needing attention: In order to ensure the normal use of the lock 1, pay attention to the lock body and the magnet seat to correct the hole position; 2, the gap between the lock body and the magnet seat should not be greater than 6mm; 3, the lock body, the magnet seat must not be scratched, Bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other incomplete matters please Carefully refer to the installation and operating instructions;

Product advantages: This product is a moving part of the product, the principle of the use of magnetic field reverse push bolt, no mechanical push; ultra-low temperature design, more energy-saving and more environmentally friendly; 800,000 power-on locking durability; built-in surge absorber to prevent power Unstable burn lock body; high-strength aluminum alloy lock body, stainless steel lock tongue; product specifications, complete set, suitable for all types of door lock installation

Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months. Notice; pictures and related content of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!

The address of this article:http://en.behost.com.cn/product/666.html

Key word:Ultra-shortmagneticelectriclock,Magneticelectriclock,Magneticelectriclockmanufacturer

The last one:Normally closed magnetic electric lock
The next one:None

Recently browse:

Electronic lock manufacturers

  • Service
  • number
  • Message
  • web site
  • Online Service