Electronic lock manufacturers

News classification

Contact

Shenzhen Behost Electronics Co. Ltd

Contact: Miss Jiang, Miss Luo

Mobile: 13570895007

TEL: 0755-27376780 23729748

FAX:0755-23358748

Email: Ld@behost.com.cn

Address: Building B, No. 4-2, Wanfeng Center Road, Xinqiao Street, Baoan District, Shenzhen


How can the magnetic lock be installed securely?

Your current position: Home page >> News >> Industry news

How can the magnetic lock be installed securely?

Date of release:2018-03-31 Author: Click:

The magnetic lock is produced by the principle of a total of electromagnetism. It has the better quality and advantages of the traditional key lock, and is safer and more practical. So, how to properly install a magnetic lock? The installation method of the magnetic lock will be described in detail below.


Before installing the magnetic lock, we must prepare for it. The first is the preparation of the screwdriver. The screwdriver is the tool used to open the magnetic lock cover. Then we use the wrench to open the side plate, so that the preparation work is roughly finished.


During the installation process, the carton must be marked on the door and drilled with a drill. Then we have to do the complicated steps of installing the magnetic lock. We must first insert the hexagonal screw into the iron plate and put the rubber. Watson is placed between two pieces of metal, and then placed on a hexagonal screw.


Insert the iron plate into the three holes on the door, insert the mushroom head from the other side of the door, lock the iron plate to the door with a hex wrench, and then fix the side plate with two semi-circular head screws. On the perforated door frame, you must pay attention to this time: Do not lock the side plate so that it can move back and forth to facilitate the correction of the position, so that the iron plate and the side plate are fixed, and then the fixed lock body After fixing the lock body and the side plate locking the semi-circular head screws of the side plates, then lock all the countersunk screws, then remove the semi-circular head screws and drill holes in the appropriate positions for wiring.


Finally, we can install the installation instructions, and finally cover the small aluminum cylinder into the screw hole of the lock body, so that a secure magnetic lock is installed.


The address of this article:http://en.behost.com.cn/news/390.html

Key word:

Recently browse:

Electronic lock manufacturers

  • Service
  • number
    13570895007
  • Message
  • web site
  • Online Service